Safe Scaffolding Installation

The Security Scaffolding system is a scaffolding system that provides maximum safety for employees during the construction of exterior works in high-rise buildings.

The main elements of the Safe Scaffolding are the panel, the starting foot, the adjustment shaft, the horizontal and cross connection, the walking platform, the ladder inside the scaffold, the railing and the wall fastener. The general principle of the system is that there is a horizontal connection at 50 and 100 cm on each floor, there is a double-row walking platform on each floor, and the passage between the floors is provided by platforms with stairs. Bottom adjustment spindles are used to level the ground.

   The Security Scaffolding system is a scaffolding system that provides maximum safety for employees during the construction of exterior works in high-rise buildings.

The Safe Scaffolding System consists of panels produced from 48*3 mm TSE certified pipes, horizontal and cross connections made of 34*2.5 mm TSE certified pipes connecting them, steel planks and ladder platforms with increased wall thickness, side rails, heel plates, starting feet and bottom. occurs in the adjustment shafts.

Sub-adjustment shafts are used with certainty to set up the scaffolding system on the scale.

The design, installation and dismantling of scaffolds must be done by experts.

A safe working system, including fall protection equipment, should be planned and implemented.

All scaffolding must be securely attached to the façade and supported.

Changes must be made by experts.

It should not be run on platforms that are not fully installed.

The piers should not be loaded more than the capacity they can carry. It must be ensured that it can carry the loads placed on it.

It should be ensured that there are suitable stairs and steps to reach the work area.

Scaffolds should be checked at regular intervals and corrected if any malfunction is found.